# SITE123 store locator: what the custom code setting can and cannot do

Source: https://locator.handledlocal.com/resources/store-locator-for-site123

SITE123 adds custom code site-wide, in the head or body, rather than in a page section. What that means for a store locator, and how to check your editor before you commit.

Platform guide. Published 2026-11-15. 6 min read.

## In short

SITE123's documented route for third-party code is Settings, then Plugins, then Add New Custom Code, with a choice of four places: after the opening head tag, before the closing head tag, after the opening body tag, or before the closing body tag. Those are site-wide positions, not a spot inside a page.

A store locator needs a spot inside a page. Code placed at the end of the body appears at the bottom of the site rather than in your locations section, so SITE123's custom code setting is not a good home for a locator on its own.

Before buying anything, open your SITE123 editor and look for an embed or HTML option inside a page section. SITE123's custom code article does not mention one, and it does not say which plans the custom code setting needs either, so check both with SITE123.

## What SITE123 documents

SITE123's support article covers plugins from its marketplace and custom code from third-party services, both managed from Settings, then Plugins in the editor. For custom code you give the snippet a name, set Enable to Yes, pick one of the four positions and paste it.

That suits tracking tags, chat bubbles and verification codes, which do not need a place on the page. It does not suit a locator, which has to sit between your page's heading and footer.

| SITE123 code position | Where a locator would appear |
| --- | --- |
| After the opening head tag | Nowhere visible |
| Before the closing head tag | Nowhere visible |
| After the opening body tag | Above everything, on every page |
| Before the closing body tag | Below the footer, on every page |

## What to do instead

We would rather you know this before a trial than find it during one.

- Look in your editor's section or element menu for an embed or HTML option. If it exists, paste the locator snippet there, on your locations page only.
- If there is none, host a locations page on a site that accepts embed code and link to it from your SITE123 menu.
- If you have one or two locations, an address and a directions link on your contact page is enough, with no custom code at all.

## If your editor has an embed section

Only follow these steps if the option sits inside a page section, not in Settings.

1. Import your locations and style the widget in the locator dashboard, then copy the snippet from Embed & Install.
2. Add the embed or HTML section to your locations page and paste the snippet.
3. Publish and open the live page.
4. Run the checks below. If the locator appears at the very top or bottom of the site, it went into the site-wide setting by mistake; remove it there.

## Checks before you call it done

On the published site.

- Open the published page in a private window, not the editor. Most builders do not run third-party scripts while you edit.
- Search your busiest town and a town you do not serve, and read both results.
- Open it at phone width and use it one-handed.
- Tap a phone link and a directions link on a real phone.
- Run Check installation in the Handled dashboard against the public URL. Setup completes when the locator has loaded on that page.

## Where Handled Locator fits on SITE123

On SITE123, Handled Locator is the embed described above: a snippet placed inside a page section, which needs an embed option in your editor. Locations come from CSV, the dashboard, or a sync from Google Sheets, Airtable, Webflow CMS or HubSpot. The map runs on your own Mapbox or Google Maps key, billed by the provider with nothing added. Plans are $19, $39 and $79 a month for 200, 2,000 and 10,000 locations, after a 7-day trial with no card. You can also run it from ChatGPT or Claude: add locations, restyle the widget and get the embed code by describing what you want, with every design change shown before it goes live.

If your editor offers only the site-wide code setting, Handled is not a good fit on SITE123 today, and we would say the same about any embedded locator.

## Sources

SITE123 Support, [Add plugins or custom code](https://www.site123.com/support/7168957-add-plugins-and-custom-code). Read on 15 November 2026.

## Frequently asked questions

### Where do I add custom code in SITE123?

In the editor, Settings, then Plugins, then Add New, then Add New Custom Code. You choose one of four head or body positions, which apply site-wide.

### Can I put a store locator on one SITE123 page?

Only if your editor offers an embed or HTML option inside a page section. SITE123's custom code setting places code site-wide, not inside a page.

### Does SITE123 custom code need a premium plan?

SITE123's custom code article does not say. Check SITE123's plan comparison or ask their support before you rely on it.
